Molde de carburo de tungsteno

Material: carburo de tungsteno Tratamiento superficial: Coat-Plating Grueso medio de la pared:> 3m m Certificación: SGS Condición: Nuevo paquete del transporte: Caja estándar Origen: Zhuzhou, Hunan Uso: Demoulding del hardware: Uso automático de la dureza: Vida:> 1,000,000 tiros Modificado para requisitos particulares: Modificado para requisitos particulares Marca registrada: G & W Especificación: 33x23x19cm Código del SA: 8101100010

Properties of grade
Grade	Density	Hardness (HRA)	TRS	Average Grain size
	(g/cm3)		(MPa)	(um)
YL01	15.25	93.5	3300	0.8
YL10.2	14.5	92	4000	0.8
YG6	14.95	90	2400	1.6
YG6X	14.95	91.5	1900	1
YG8	14.75	89.5	2800	1.6
YG11	14.4	87.5	3100	1.6
YG15	14.05	87	3000	1.6
Application recommended
Grade	Applications recommended
YL01	Used for drawing diameter less than 1.5 mm of steel, tungsten and molybdenum wire under high speed drawing as well as nonferrous metals with high requirement on surface finish.
YL10.2	Used for drawing diameter between 1.5 mm to 10mm of steel, tungsten and molybdenum wire under high speed drawing as well as nonferrous tubes with high requirement on surface finish.
YG6	Used for drawing the diameter less than 20mm of steel, nonferrous metals and its alloy wire or bar under a moderate stress. It also used for tubes less than diameter of 10mm.
YG6X	Used for drawing the steel wire, nonferrous metals and its alloy wire or bar under the requirement of good wear resistant.
YG8	Used for drawing diameter less than 50 mm of steel, nonferrous and its alloy wire or bar under a moderate stress. It also used for tubes under 35mm.
YG11	Used for drawing diameter less than 60 mm of steel, nonferrous and its alloy wire or bar under a moderate stress. It also used for tubes under 35mm.
YG15	Used for steel pipe and steel bar as well as alloy steel bolt and head forging of rivet under a certain big stress

Grupos de Producto : Herramienta de carburo de tungsteno > Otra herramienta de carburo de tungsteno