Dibujo de alambre de carburo cementado terminado muere con caja de acero

S11, S13, R, W104, W105, 6X4, 9X6, S11, S13, R, W104, W105, etc. Material: Tipo del agujero del carburo cementado: Molde redondo Tratamiento superficial: Polaco Certificación: 16X13, etc Paquete del transporte: Caja estándar Origen: Zhuzhou, Hunan Tipo: Plomo del carburo de tungsteno Modo que forma: Cavidad de la compresión: Multi-cavidad Uso: Hardware, electrodomésticos, garantía electrónica: 1 año Grado: Yg3, Yg3X, Yg6, Yg6X, Yg8 , Yg11, Yg15 Marca de fábrica: G & W Especificación: 34 x 17 x 14 cm Código del SA: 82072090
1. Nuestra ventaja
1 100% materia prima
2 HIP Horno Sinterizado
3 Rectificado de alta precisión
4 Diámetro hasta 0.1mm
5 Producir moldes acabados con caja de acero
6 Entrega rápida
7 fabricante profesional de los productos del carburo de tungsteno con 20 años de experiencia.
8 sistema de control de calidad completo y la inspección estricta.

2. Nuestro tamaño del molde
Tipo W
Tipo S11
Tipo S12
Tipo S13
Tipo 22
Tipo 23
Tipo S30
Tipo S40
Tipo S41
Tipo S42
Tipo S60
Tipo r

3. Recomendación de grado

Properties of grade
Grade	Density	Hardness (HRA)	TRS	Grain size
	(g/cm3)		(MPa)	(um)
YL01	15.25	93.5	3300	0.8
YL10.2	14.5	92	4000	0.8
YG6	14.95	90	2400	1.6
YG6X	14.95	91.5	1900	1
YG8	14.75	89.5	2800	1.6
YG11	14.4	87.5	3100	1.6
YG15	14.05	87	3000	1.6
Application recommended
Grade	Applications recommended
YL01	Used for drawing diameter less than 1.5 mm of steel, tungsten and molybdenum wire under high speed drawing as well as nonferrous metals with high requirement on surface finish.
YL10.2	Used for drawing diameter between 1.5 mm to 10mm of steel, tungsten and molybdenum wire under high speed drawing as well as nonferrous tubes with high requirement on surface finish.
YG6	Used for drawing the diameter less than 20mm of steel, nonferrous metals and its alloy wire or bar under a moderate stress. It also used for tubes less than diameter of 10mm.
YG6X	Used for drawing the steel wire, nonferrous metals and its alloy wire or bar under the requirement of good wear resistant.
YG8	Used for drawing diameter less than 50 mm of steel, nonferrous and its alloy wire or bar under a moderate stress. It also used for tubes under 35mm.
YG11	Used for drawing diameter less than 60 mm of steel, nonferrous and its alloy wire or bar under a moderate stress. It also used for tubes under 35mm.
YG15	Used for steel pipe and steel bar as well as alloy steel bolt and head forging of rivet under a certain big stress

Grupos de Producto : Matriz de dibujo de carburo de tungsteno